Промышленный ПК Beckhoff C6015-0030
Вся продукция Beckhoff
Промышленный ПК Beckhoff C6015-0030. Промышленный ПК Beckhoff для систем промышленной автоматизации. Доступные технические характеристики и параметры применения приведены ниже.
ХАРАКТЕРИСТИКИ
| Артикул: | C6015-0030 |
| Бренд: | Beckhoff |
| Технические характеристики | |
| Device type | Ultra-compact control cabinet PC |
| Housing | aluminum zinc die-cast housing |
| Монтаж | mounting sheet at the rear wall | mounting sheet at the side wall or for DIN rail |
| Slots for hard disk/flash | 1 slot for M.2 SSD |
| Cooling | passive with single side cooling plate |
| Free space for air circulation | 5 cm (2") on top and bottom of the PC required |
| Protection rating | IP20 |
| Рабочая температура | 0…50°C |
| Размеры (Ш × В × Г) | 82 x 82 x 40 мм (3.2" x 3.2" x 1.6"), without mounting plate |
| Processor | Intel Atom® x6214RE, 1.4 GHz, 2 cores (TC3: 40) | Intel Atom® x6416RE, 1.7 GHz, 4 cores (TC3: 50) |
| Motherboard | compact motherboard for Intel Atom® x6 |
| Memory | 4 GB DDR4 RAM | up to 8 GB DDR4 RAM ex factory |
| Graphic | integrated in the processor |
| Ethernet | 2 x 100/1000/2500BASE-T on-board |
| Hard disks/flash | 40 GB M.2 SSD | up to 320 GB M.2 SSD |
| Interfaces | 2 x USB 3.1 Gen. 2, 1 x DisplayPort |
| Питание | 24 В DC | UPS CU81xx |
| Operating system | – | Windows 10 IoT Enterprise 2021 LTSC, Windows 11 IoT Enterprise 2024 LTSC, TwinCAT/BSD |
| Options | Device type |
| Ultra-compact control cabinet PC | Housing |
| aluminum zinc die-cast housing | Installation |
| mounting sheet at the rear wall | mounting sheet at the side wall or for DIN rail |
| Intel Atom® x6416RE, 1.7 GHz, 4 cores (TC3: 50) | Motherboard |
| compact motherboard for Intel Atom® x6 | Memory |
| 4 GB DDR4 RAM | up to 8 GB DDR4 RAM ex factory |
| up to 320 GB M.2 SSD | Interfaces |
| 2 x USB 3.1 Gen. 2, 1 x DisplayPort | Power supply |
| 24 V DC | UPS CU81xx |
| Windows 10 IoT Enterprise 2021 LTSC, Windows 11 IoT Enterprise 2024 LTSC, TwinCAT/BSD | © Beckhoff Automation 2026 - Terms of Use |
