Моторный модуль XTS Beckhoff ATH2020
Вся продукция Beckhoff
Моторный модуль XTS Beckhoff ATH2020. Моторный модуль XTS Beckhoff для систем управления движением и приводной техники. Основные технические характеристики, параметры подключения и эксплуатации приведены ниже.
ХАРАКТЕРИСТИКИ
| Артикул: | ATH2020 |
| Бренд: | Beckhoff |
| Технические характеристики | |
| Motor type | long stator linear motor segment |
| Исполнение корпуса | curved segment, 22.5° (positive curve, Ø 1273 мм) |
| Motor length | 250 мм |
| Технология подключения | cover between the motor modules (daisy chaining) |
| Материал | housing: stainless steel 1.4404 AISI 316L; sealing: VMQ silicone |
| Length per feed | max. 3 m (voltage supply, EtherCAT) |
| Cooling | convection |
| Ambient temperature (operation) | 0…40°C |
| Electrical data | Mechanical data |
| To top | System data |
| ATHxxxx-xxxx | Magnet pitch |
| ≥ 60 mm | Geometries |
| rectangle, square, circle or straight | Diameter |
| 180° curved segment: 267 mm (clothoid), 45° curved segment: 637 mm, 22.5° curved segment: 1273 mm, -22.5° curved segment: 1273 mm (1) | Alignment |
| horizontally, vertically or at any angle from 1…179° | Peak force |
| ATH9001-x550 (5-pin): 90 N, ATH9001-xAA0 (10-pin): 145 N (specification refer to straight sections) | Continuous force |
| ATH9001-x550 (5-pin): 30 N, ATH9001-xAA0 (10-pin): 55 N (specification refers to straight sections) | Max. speed |
| 4 m/s | Max. acceleration |
| 10 g | Payload |
| up to 4 kg, higher loads with reduced dynamics | Cycle time |
| 250 µs | Absolute accuracy |
| < ±0.25 mm within a straight module | Repeatability |
| < ±0.01 mm (standstill unidirectional) | Positioning accuracy |
| < ±0.15 mm @ 1.5 m/s within a straight module | System size |
| > 100 m, > 200 movers | Protection rating |
| IP69K (in assembled condition for a closed system) | Approvals/markings |
| CE, UL | Vibration/shock resistance |
| conforms to EN 60068-2-6/EN 60068-2-27 | EMC immunity/emission |
| conforms to EN 61000-6-2/EN 61000-6-4 | (1) Diameter specifications refer to the center point of the motor |
| Информация для заказа | |
| ATH9001-X550 | (5-pin): 90 N, ATH9001-xAA0 (10-pin): 145 N (specification refer to straight sections) | (5-pin): 30 N, ATH9001-xAA0 (10-pin): 55 N (specification refers to straight sections) |
