Моторный модуль XTS Beckhoff AT2202
Вся продукция Beckhoff
Моторный модуль XTS Beckhoff AT2202. Моторный модуль XTS Beckhoff для систем управления движением и приводной техники. Основные технические характеристики, параметры подключения и эксплуатации приведены ниже.
ХАРАКТЕРИСТИКИ
| Артикул: | AT2202 |
| Бренд: | Beckhoff |
| Технические характеристики | |
| Motor type | long stator linear motor segment |
| Исполнение корпуса | straight |
| Motor length | 500 мм |
| Технология подключения | B23 connector |
| Length per feed | max. 3 m (voltage supply, EtherCAT) |
| Cooling | convection |
| Ambient temperature (operation) | 0…40°C |
| Electrical data | Mechanical data |
| To top | System data |
| AT220x | Magnet pitch |
| ≥ 60 mm | Geometries |
| any (by combination with segments of the standard motor modules) | Alignment |
| horizontally, vertically or at any angle from 1…179° | Peak force |
| AT9001-x550 (5-pin): 80 N, AT9001-x775 (7-pin): 105 N, AT9001-xAA0 (10-pin): 168 N (specification refer to straight sections) | Continuous force |
| AT9001-x550 (5-pin): 30 N, AT9001-x775 (7-pin): 45 N, AT9001-xAA0 (10-pin): 75 N (specification refers to straight sections) | Max. speed |
| 4 m/s | Max. acceleration |
| 10 g | Payload |
| up to 20 kg, higher loads with reduced dynamics | Cycle time |
| 250 µs | Absolute accuracy |
| < ±0.70 mm within a straight module | Repeatability |
| < ±0.075 mm (standstill unidirectional) | Positioning accuracy |
| < ±0.45 mm | System size |
| > 100 m, > 200 movers | Protection rating |
| IP65 (in assembled condition for a closed system, only waterproof for a short time, not corrosion resistant) | Approvals/markings |
| CE, UL | Vibration/shock resistance |
| conforms to EN 60068-2-6/EN 60068-2-27 | EMC immunity/emission |
| conforms to EN 61000-6-2/EN 61000-6-4 | System data |
| Информация для заказа | |
| AT9001-X550 | (5-pin): 80 N, AT9001-x775 (7-pin): 105 N, AT9001-xAA0 (10-pin): 168 N (specification refer to straight sections) | (5-pin): 30 N, AT9001-x775 (7-pin): 45 N, AT9001-xAA0 (10-pin): 75 N (specification refers to straight sections) |
| IP65 | (in assembled condition for a closed system, only waterproof for a short time, not corrosion resistant) |
| B23 | connector |
